Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Shifting to Low - 80 series

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 434
Joined: Wed Jul 13, 2005 10:07 am
Location: Gold Coast

Shifting to Low - 80 series

Post by waxhead.. »

My girlfriends mums 80 wont shift past 4high. Its a base model 80, 1990 build and its done some k's. Its their farm truck.
It will shift freely from 2High to 4High but the transfer shifter won't lift to go from 4High to Neutral or 4Low.
I have had a similar problem in my sierra and it was just the transfer bush had disintegrated, is this a similar deal? common problem in 80's? or something more sinister?
Cheers.
Rhys.
92 WT Sierra
04 Navara STR Dual Cab 3.0di
Top
Posts: 128
Joined: Mon Oct 23, 2006 5:29 pm
Location: Melbourne

Post by rezpkt »

hey mate check this thread might give you some ideas.

http://www.outerlimits4x4.com/phpBB2/vi ... p?t=130294
Team: Cause For Concern
http://www.offroad80s.com
Top
Posts: 434
Joined: Wed Jul 13, 2005 10:07 am
Location: Gold Coast

Post by waxhead.. »

Thanks alot.
I had tried searching but am on dial up out here and it is very tedious.
Cheers.
92 WT Sierra
04 Navara STR Dual Cab 3.0di
Top
Posts: 1183
Joined: Thu Jul 01, 2004 5:05 pm
Location: Tewantin

Post by flyinwall »

pull the shifter out and give it a good clean and grease and put it back in and it should work properly
R.I.P. Darryl "DAZZA" Mutch 02/08/1978 - 26/08/2012 aged 34 years ... You will be missed my little brother.

http://www.outerlimits4x4.com/viewtopic.php?f=16&t=39190&start=150
Top
Posts: 158
Joined: Tue Jul 04, 2006 2:22 pm
Location: Brisbane Gleneagle

no shift

Post by cookiesmonsta »

i had the same problem with my 80 and just pulled stick out and cleaned and greased it properly. havent had a drama since
80 series dual cab full internal cage 5 inch lift GU diffs cutting brakes with front and rear lockers winch on 38's
A.G.Cook Excavator Hire 0429167911
Top
Posts: 434
Joined: Wed Jul 13, 2005 10:07 am
Location: Gold Coast

Post by waxhead.. »

thanks guys, I pulled the boot off, gave it a spray, left it over night and it free'd up and feels like new. Thanks.
92 WT Sierra
04 Navara STR Dual Cab 3.0di
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 1 guest