Outer Limits 4x4 Board

Does anyone know where I can get some new body mount insulators for my 95 dual cab hilux. The ones between the lift block and mounting bracket have deteriorated.

Any comments or ideas welcome

cheers

Skye

most likely place is a wreckers. Try fester at All 4x4 Minden.
Or someone who has a spare hilux lying around.

I'm going to replace the 10mm bolts with 12mm HD bolts to increase strength.

Has anyone used 12mm bolts in there lift?

Toyota but $25 - $50 each new, It was something around that when I looked.

I replaced 6 of my body mounts, both top and bottom rubbers (12 bits to buy all up), on a 92 dual cab not long ago. I think it was about $220 all up from Toyota.

Only way i'll do one is to step up to a 7/16 or 12mm grade 8 bolt you need to drill the factory crush tube in the rubbers and stock washers also for the top washers try get some slightly larger than stock washers and thicker i'll post pic's toomorrow of what lose body bolts do over time.

Here is some pics of mine that I just did.

The old and new

The new ones in place


I used 4mm thick washers on the body so they shouldn't pull through in a hurry!

The d**k who did the lift before i bought the truck did an incredibly dodgy job . I don't know what he used for blocks and the washers he used in the cab were about 2mm jobs. The front right bolt under the cab had pulled through the floor, hence the reason for new blocks!