I ripped a plug out during my conversion and need some wiring info please.
Chain driven 4 Runner transfer, there is a plug at the rear of the transfer that drives the transfer motor. The loom from the car has it's plug ripped off and the wire colors do not correspond with the others.
The transfer motor has the following colors in it's plug,
Green large wire
Green with black stripe large wire
Green small wire
yellow small wire
Black small wire
The loom plug had the following colors,
Green with pink or orange stripe
Yellow with red stripe
Pink with green stripe
Yellow with black stripe
White with black stripe
Can anyone help with what wire goes where please.
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Transfer wiring
Moderators: toaddog, Elmo, DUDELUX
Who is online
Users browsing this forum: No registered users and 3 guests