Notice: We request that you don't just set up a new account at this time if you are a previous user. If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
I've got the opportunity to buy a pair of diffs complete with axles with ARB lockers installed (and the front diff is steel ). To fit them, worst case I will need to change the front CV's to 26 spline.
I have a 92 LWB with a 4 speed auto gearbox. As near as I can make out, that means I should have 5.125 diffs on my car. The new diffs are 4.875 which is about 5% higher gear. At the moment I am only running 29" swampers on 15" rims when I go bush and 205/80 R16's on the road which are about 12mm bigger than the Swampers.
So the question is, will I need to swap my Ring and pinions over now or wait until I wear out my Swampers and put 31" or 32" rubber on?
). To fit them, worst case I will need to change the front CV's to 26 spline.
That was pretty much what I thought..
