Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

external mounted compressor, good idea?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 372
Joined: Tue Jul 05, 2005 6:06 pm
Location: Bribie Island

external mounted compressor, good idea?

Post by sidewayz »

hey

i have a Max air 11 siting here for my chopped gq. planing on mounting it behind the cab with an air tank, pressure valve etc.

is this a good idea?

is it ok for the max air to be exposed to water, dirt etc?

it wil be fairly protected as the cab will be on one side of it and the tank the other, but its stil goin to get wet and muddy.

comments and other options most welcome

cheers

matty
Posts: 310
Joined: Fri May 25, 2007 12:16 am
Location: at the shed gympie

Post by scuba steve 22 »

put it in a tool box of some sort
Posts: 1415
Joined: Sat Oct 15, 2005 2:09 pm
Location: Trying to hide the bus keys!

Re: external mounted compressor, good idea?

Post by v6hilux »

sidewayz wrote:is it ok for the max air to be exposed to water, dirt etc?
It's asking for trouble, though some here will argue with that!

Start thinking about saving for the next one and where you will mount it, not saying 100% will die, to prevent what may kill this one, if it ever happens!
I'm the sharpest tool in the shed!
Posts: 372
Joined: Tue Jul 05, 2005 6:06 pm
Location: Bribie Island

Post by sidewayz »

will it get enough ventilation if i mount it in a tool box of its own?
Posts: 146
Joined: Tue Oct 05, 2004 4:58 pm
Location: Sydney

Post by Harrow »

make sure you have it in a box of some sort cause my big red is on my engine bay and it now runs like crap!!!! when you put it in the box it should be ok but if it was me i would just open the lid when it was going to be on for long periods of time. e.g. pumping up tyres just to keep it as cool as possible. i would also consider running a breather hose into your cab so that the compressor can draw fresh cooler dryer air. cause other wise its just drawing hot air from inside the tool box.
2002 100 Series Cruiser 4.5L ULP
5 inch lift
Warn 9.5xp
315/75R16 Micky Thompson MTZ's
Custom bull bar

www.lukeys4x4.com

[u]AUSTRALIA LOVE IT OR LEAVE IT!![/u]
Posts: 3132
Joined: Wed Sep 28, 2005 3:22 pm
Location: Newy

Post by HotFourOk »

sidewayz wrote:will it get enough ventilation if i mount it in a tool box of its own?
People mount them under a seat, so it should be ok in a tool box.
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Posts: 372
Joined: Tue Jul 05, 2005 6:06 pm
Location: Bribie Island

Post by sidewayz »

ok thanx for the info.

i wil check how much room i have under my passenger seat, if not a tool box of some sort will be the way to go.

cheers

matty
Post Reply

Who is online

Users browsing this forum: No registered users and 142 guests