Page 1 of 1
diff ratios
Posted: Thu Feb 14, 2008 8:49 pm
by Rampage
hey guys, currently running standard gearing of a 4.2 TD wagon with 6" lift and 36 pedes and want to get the gearing back to standard! am i correct in saying that 4.6's would be the go and that would put me somewere in the ball part!
also who makes strong gear sets and what is the highest ratio that someone makes 4.8's maybe???
cheers
Posted: Thu Feb 14, 2008 9:57 pm
by turbo gu
you can 4.6:1 which is slight lower than standard of 4.3:1 if you want slightly higher. I have 4.6s in mine on 35's and it revs a touch to high for my liking. next time i would go 4.3s and if low range isn't enough change the transfer gears.
Don't go the aftermarket gears. i smashed 2 sets of rears in 18 months
and that wasn't been too hard on them. both failed on road not the dirt and hadn't been offroad for a while before hand
Posted: Fri Feb 15, 2008 6:16 pm
by Rampage
thanx mate, think ill go with 4.6s then as i will be running 37-38s! were did you get your ratios from! i heard that you should get geniune ones but just wondering if there was a cheaper place out there that can get them!
cheers
Posted: Fri Feb 15, 2008 7:22 pm
by turbo gu
I got them thru a 4wd shop thru G and J i think it was in SA. the genuine ones are about double the price
Posted: Fri Feb 15, 2008 8:54 pm
by bogged
Rampage wrote:thanx mate, think ill go with 4.6s then as i will be running 37-38s! were did you get your ratios from! i heard that you should get geniune ones but just wondering if there was a cheaper place out there that can get them!
if your running that big a tire, go genuine gears, will save you bux in long term.
Posted: Sat Feb 16, 2008 9:44 am
by REVNGQ
