Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Blown head gasket?

Tech Talk for Rover owners.

Moderator: Micka

Post Reply
Posts: 147
Joined: Wed Feb 01, 2006 2:19 pm
Location: Brisbane

Blown head gasket?

Post by Hally »

G'day guy's need your words of wisdom my resivour tank has been over flowing and water sprays out the side of the bonnet today when driving there was a bit of steam coming from the same spot and the water temp went cool then rised rapidly so I pulled over turned the car off opened the bonnet and found a crack in my resivour tank and was bubbling rapidly like it was going to explode once cooled down I opened up the cap and there was no water in the tank so I filled it up started the car and it bubbled quite badly like a boiled jug of water and the temp went straight to hot and there was a bit of water around the tip of the exhaust so I put it on a tilt tray and took it home as I didnt want to risk it . any thoughts on what is wrong ?? The car is a defender with a 4.6 V8 I've never had overheating problems for 2years Thats when the conversion was done and there has been no mods to it for 2years
defender 110,4.6,auto,36simex,maxidrive everything. "JEEP" your right, I dont understand????
Posts: 71
Joined: Thu Sep 02, 2004 9:56 pm
Location: Somewhere in Mexico ;D

Post by Nice_Surf »

It sounds like you've done a head to me
'91' Dual Cab Hilux
'07' Suzuki GSX1400
'82' Suzuki PE250Z
What more do I need
Posts: 764
Joined: Wed Sep 07, 2005 10:59 pm
Location: STOCKTON NSW

Post by lokka »

Could be many things tho id be lookin at headgaskets first then maby a sliped liner as its a 4.6 they were renowned for sliping liners and leaking water into the cylinder or vice versa leakin combustion gasses into the cooling system ...

If your not spanner friendly find a good landy man so u get it sorted right first time :D :D :D
Cheers

Chris

Questions $20ea Answers for said Questions $100ea
I can fix your F'ups for a fee .......
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests