im leaking some oil out the back of the gear box where the drive shaft concest to between the flange and the super thin metal cover case thingy
is it eays to change the oil seal in the gear box there?
cheers matt
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
leaking some oil lil help
Moderators: toaddog, Elmo, DUDELUX
leaking some oil lil help
1995 land rover disco on 265 muddies
Yeah thingys are easy to change. It'll just be drop the shaft out or just that end of it undo the nut pull the flange off and change the oil seal which should be under 20 bucks from ripco. when you do the nut up that holds the flange on don't forget to bend the end of it over into the groove in the shaft this is so it doesn't work loose
plenty of parts on the bench
Who is online
Users browsing this forum: No registered users and 0 guests