can some one tell me where to find the guidelines for body lifts in vic? thought 50mm or 2" was legal? could be wrong tho.
cheers
dave
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
body lift legal?
Moderators: toaddog, TWISTY, V8Patrol, Moderators
body lift legal?
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
been through vicroads but nothing on body lifts just suspension lift lowering? do you need engineers for 50mm body lift? thought it was only once you go over this height?
Keep it shiny side up!
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
Now doing general fab work and painting
trays, trailers, engine swaps on request, some tube work, silo section sliders, rust repairs, ute chops etc
just had a dig it used to be on there. 
might have to contact them directly to confirm 100% but yea you do.
at least that's what my engineer told me
edit: http://www.infrastructure.gov.au/roads/ ... eb2006.pdf
page 63 - BUT that's providing vicroads are using the NCOP, most likely they just use it when it suits their purpose's. good luck
might have to contact them directly to confirm 100% but yea you do.
at least that's what my engineer told me
edit: http://www.infrastructure.gov.au/roads/ ... eb2006.pdf
page 63 - BUT that's providing vicroads are using the NCOP, most likely they just use it when it suits their purpose's. good luck
Who is online
Users browsing this forum: No registered users and 2 guests