Does anyone know what boost the twin turbo liberty runs factory.
just looking at using them in a conversion.
Cheers
Coza
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Subaru factory boost pressure
Moderators: toaddog, TWISTY, V8Patrol, Moderators
Subaru factory boost pressure
Corey & Simone
Team Cozamatic Racing
Team Cozamatic Racing
Taken from an autospeed article on the B4 Liberty:
).
Watch out for the 'Valley Of Death' though, at 4000-4500 rpm... they usually see a boost drop of 4-5psi.
So that's about 14psi peak, with around 12psi once up to full temperature (getting floggedwe saw a 0.95 Bar peak boost figure in the mid-range, dropping to 0.75 Bar in the top-end. But once heat soak set in after a couple of runs, peak boost slipped to 0.8 Bar and top-end boost remained around 0.70-0.75 Bar.
).Watch out for the 'Valley Of Death' though, at 4000-4500 rpm... they usually see a boost drop of 4-5psi.
[quote="RockyF70 - Coming out of the closet"]i'd be rushing out and buying an IFS rocky[/quote]
Who is online
Users browsing this forum: No registered users and 3 guests