Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

BJ42 power steering pulley

Tech Talk for Cruiser owners.

Moderators: toaddog, Elmo, DUDELUX

Forum rules
Post Reply
Posts: 536
Joined: Mon Apr 18, 2005 2:59 pm
Location: sydney

BJ42 power steering pulley

Post by micka1 »

hey guys went away the other weekend in my BJ42 ,it has a 3B motor with power steering . whilst away the power steering was making a bit of noise and i discovered that i have actually split the power steering tensioner pulley in half .
So i have been trying to find one since and can't get one new as the are NLA from toyota or aftermarket.
As it runs a 15A wide belt i seem to be having trouble matching something else up to fit. i have been tryin a few wreckers but to no avail so far.
just wondering if i should keep trying the wreckers or if someone has one on here or know where i could get one of these from ?

any help would be greatly appreciated .
thanks Micka1
Top
Posts: 207
Joined: Thu Jun 26, 2003 10:02 pm
Location: sydney

Post by turbo4t »

What diametre and bore size? I may have something.
Top
Posts: 536
Joined: Mon Apr 18, 2005 2:59 pm
Location: sydney

bj42

Post by micka1 »

the diameter is about 82 mm but is not too important as there is heaps of adjustment or i can run another length belt . as long as it fits a 15Abelt
and the internal bolt size is 11mm .

Thanks
Micka1
Top
Posts: 2765
Joined: Wed Jan 14, 2004 10:32 pm
Location: somewhere out there

Post by shorty_f0rty »

id see if one from a 2h would fit. I had the bearing go on mine and fixed it using bits from a 2h pwr steer tensioner pully..

might be another avenue to try?
Built, not bought!
'84 BJ42 - sold! :(
'79 Coiled and turbo diesel'd FJ55
Top
Post Reply

Return to “Cruiser / Prado”

Who is online

Users browsing this forum: No registered users and 0 guests