Page 1 of 1
windsor conversion fuel pump choices
Posted: Sat Mar 15, 2008 7:00 pm
by chunderlicious
ok coming time to hook up the fuel system on the patrol, ive got a great deal on a holley red and was wondering if it is big enough to supply enough fuel to the swirlpot for my efi windsor. the pot is only 1.5 litres and im running a bosch 044 fuel pump to the engine. will the red be enough?
there is also the option of gas if its feasable
Posted: Sun Mar 16, 2008 3:32 pm
by chunderlicious
no one?
Posted: Sun Mar 16, 2008 3:41 pm
by RUFF
The red will be more than enough as long as you are running your fuel rail return back to the pot.
Posted: Sun Mar 16, 2008 4:19 pm
by brad-chevlux
the holley pumps are noisy, there are plenty of others around that can flow the feul you need with half the noise and twice the reliability
carter FMP4600HP 100gph at 8PSI
carter FMP4070 72gph at 6PSI (on paper equals the holley red pump)
holley red pump 71gph at 4PSI 97gph free flow.
in your setup it will be pumping free flow.
Posted: Mon Mar 17, 2008 9:09 pm
by cloughy
Mate a standard Facet ticker pump will maintain fuel to the swirl pot
Just put any stinking pump in you like
