Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

gq cup holders

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

gq cup holders

Post by Screwy »

someone used to sell these through outers some time ago i cant recall who it was, i bought a set once before a coupla years ago, just wanted to know who that was so i could get another one for my wagon.

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 533
Joined: Sat Jan 15, 2005 4:54 pm
Location: Melbourne, Australia.

Contact:
Contact InSanE

Post by InSanE »

just go to your local nissan dealer they are $38 plus a few extra bucks for the plastic caps if you want them.
GQ LWB TD42, boost, lockers etc

http://forum.mudrhino.com.au/viewtopic.php?t=262&start=30
Top
User avatar
JWB
Posts: 451
Joined: Sun Aug 24, 2003 5:48 pm
Location: Logan

Post by JWB »

IIFC your local Nissan dealer will have the best price.
I remember someone on here saying they bought some to put on ebay
and made some easy $$$$
Cheers
JB
Top
Posts: 1040
Joined: Fri Jun 29, 2007 7:57 pm
Location: yatala, halfway between brisbane and GC

Post by love ke70 »

where do they go? and is there provision for them in a ute?

cheers
97 GQ patrol coilcab. TD42, safari turbo kit with fiddled turbo, D-GAS kit. dyno results to come...
4inch lift, king springs, efs and procomp shocks
315/70R16 cooper ST's
found fuel economy...
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

centre console. all gq models.
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 1434
Joined: Sat May 22, 2004 6:44 pm
Location: stalking

Post by blackmav »

Bogged was the man selling them and he was doing them cheap.
Short GQ, Petrol, Turbo.
GQ TD42 ute
Top
Posts: 139
Joined: Fri Apr 13, 2007 3:18 pm
Location: Melbourne

Post by 1TUFFGQ »

Or give patrolapart a call. I personally don't like them as I found out your drinks get hot very quickly, due to it sitting on the trans tunnel.
Top
Posts: 1040
Joined: Fri Jun 29, 2007 7:57 pm
Location: yatala, halfway between brisbane and GC

Post by love ke70 »

anyone got pics?

the ute doesnt really have a centre console of sorts...

would be good for keepin ya coffee warm :D
97 GQ patrol coilcab. TD42, safari turbo kit with fiddled turbo, D-GAS kit. dyno results to come...
4inch lift, king springs, efs and procomp shocks
315/70R16 cooper ST's
found fuel economy...
Top
Posts: 5060
Joined: Tue Apr 08, 2003 7:28 pm
Location: Narellan Vale, Sydney

Post by Screwy »

well the 2 seater utes have a centre console im pretty sure, if u have a bench seat then u have buckleys.

they screw into the front of the centre console where u usually throw ur change, in between the pen holders and the hand brake bit.

screwy
TUFF TRUCK TEAM OPPOSITE LOCK Proudly Sponsored By:

Opposite Lock Narellan, Lightforce Australia, Offroad Systems, Judd Panels, Townsend Signs, RDG Engineering, Central Safety Workwear
Top
Posts: 1040
Joined: Fri Jun 29, 2007 7:57 pm
Location: yatala, halfway between brisbane and GC

Post by love ke70 »

ahh yep yep, mines the 3 seater, with just the little gap for the handbrake, no center console.

i just bought a din size one from a mate who got it from autobarn or somewhere, was gonna mount it down in front of the shifter, where the HU goes, but put a pioneer HU and a UHF down there, so i just velcrod it to the dash :D

:armsup:
97 GQ patrol coilcab. TD42, safari turbo kit with fiddled turbo, D-GAS kit. dyno results to come...
4inch lift, king springs, efs and procomp shocks
315/70R16 cooper ST's
found fuel economy...
Top
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

priced them the other day... $32. love the suckers payin $70+ on ebay :rofl: :rofl: :rofl: :rofl:
Top
Posts: 145
Joined: Wed Sep 27, 2006 4:13 am
Location: Abbotsford, BC, Canada

Post by canuck »

Made my own and didn't loose the space at the console. All I did was buy a cupholder that has that sticky tac stuff on it. I drilled a hole in the bottom of it. Then I took a small piece of bar with a hole drilled in each end. I bent it in the appropriate "S" pattern so it is up off the trans tunnel. Screwed one end into the cup holder and the other I screwed in using the scew already holding the little tray in place. All done for less than $10.
Top
Posts: 145
Joined: Tue Jun 13, 2006 8:00 pm
Location: coffs harbour

Post by naif »

bogged wrote:priced them the other day... $32. love the suckers payin $70+ on ebay :rofl: :rofl: :rofl: :rofl:
yep thats what i just paid, my brother works at nissan dealership on the GC :D, it fits like a glove, right colour, 2 week wait as it came from jap land.
Top
Posts: 2097
Joined: Mon Jun 14, 2004 8:06 pm
Location: Land of Plenty

Post by blkmav »

bogged wrote:priced them the other day... $32. love the suckers payin $70+ on ebay :rofl: :rofl: :rofl: :rofl:
When I was selling them on eBay my highest winner paid $92 without delivery :D Until someone else started selling them and ruined my business :cry:
Weekdays - Prado GXL D4D with some stuff
Weekends - Mav shorty with lots of stuff
Top
Posts: 145
Joined: Wed Sep 27, 2006 4:13 am
Location: Abbotsford, BC, Canada

Post by canuck »

blkmav wrote:winner paid $92 without delivery :D Until someone else started selling them and ruined my business :cry:
Like Blackburn4x4... IMO, still bloody expensive for a bit of injection molded plastic which probably cost less than $0.50 to make.
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests