Page 1 of 1
gq cup holders
Posted: Sun Mar 16, 2008 6:31 pm
by Screwy
someone used to sell these through outers some time ago i cant recall who it was, i bought a set once before a coupla years ago, just wanted to know who that was so i could get another one for my wagon.
screwy
Posted: Sun Mar 16, 2008 6:54 pm
by InSanE
just go to your local nissan dealer they are $38 plus a few extra bucks for the plastic caps if you want them.
Posted: Sun Mar 16, 2008 6:55 pm
by JWB
IIFC your local Nissan dealer will have the best price.
I remember someone on here saying they bought some to put on ebay
and made some easy $$$$
Cheers
Posted: Sun Mar 16, 2008 7:16 pm
by love ke70
where do they go? and is there provision for them in a ute?
cheers
Posted: Sun Mar 16, 2008 7:23 pm
by Screwy
centre console. all gq models.
Posted: Sun Mar 16, 2008 7:24 pm
by blackmav
Bogged was the man selling them and he was doing them cheap.
Posted: Sun Mar 16, 2008 7:44 pm
by 1TUFFGQ
Or give patrolapart a call. I personally don't like them as I found out your drinks get hot very quickly, due to it sitting on the trans tunnel.
Posted: Sun Mar 16, 2008 8:15 pm
by love ke70
anyone got pics?
the ute doesnt really have a centre console of sorts...
would be good for keepin ya coffee warm

Posted: Sun Mar 16, 2008 8:32 pm
by Screwy
well the 2 seater utes have a centre console im pretty sure, if u have a bench seat then u have buckleys.
they screw into the front of the centre console where u usually throw ur change, in between the pen holders and the hand brake bit.
screwy
Posted: Sun Mar 16, 2008 8:44 pm
by love ke70
ahh yep yep, mines the 3 seater, with just the little gap for the handbrake, no center console.
i just bought a din size one from a mate who got it from autobarn or somewhere, was gonna mount it down in front of the shifter, where the HU goes, but put a pioneer HU and a UHF down there, so i just velcrod it to the dash

Posted: Sun Mar 16, 2008 9:02 pm
by bogged
Posted: Mon Mar 17, 2008 3:02 am
by canuck
Made my own and didn't loose the space at the console. All I did was buy a cupholder that has that sticky tac stuff on it. I drilled a hole in the bottom of it. Then I took a small piece of bar with a hole drilled in each end. I bent it in the appropriate "S" pattern so it is up off the trans tunnel. Screwed one end into the cup holder and the other I screwed in using the scew already holding the little tray in place. All done for less than $10.
Posted: Mon Mar 17, 2008 12:06 pm
by naif
yep thats what i just paid, my brother works at nissan dealership on the GC

, it fits like a glove, right colour, 2 week wait as it came from jap land.
Posted: Mon Mar 17, 2008 12:17 pm
by blkmav
When I was selling them on eBay my highest winner paid $92 without delivery

Until someone else started selling them and ruined my business

Posted: Mon Mar 17, 2008 12:53 pm
by canuck
blkmav wrote:winner paid $92 without delivery

Until someone else started selling them and ruined my business

Like Blackburn4x4... IMO, still bloody expensive for a bit of injection molded plastic which probably cost less than $0.50 to make.