Outer Limits 4x4 Board

need some help changing the timing belt on my paj.
i got the book but i lent it to a mate so im stuck for a few days.


i got the radiator out, loosened all the belts etc..
undone the large nut (19mm) and the 4 nuts (12mm) on the bottom pulley but it doesnt come off..
is there a way to do it?
ive pulled everything apart that i can see but cant figure out how to go any further..


any help greatly apreciated


wana get the paj back on the road and have some fun

Free download of the manual here:

http://www.4x4wire.com/forums/showflat. ... 14&fpart=1

thanks mate il have a look
hopefully i can get it back on the road soon

hey j-top,

can i let you in on something NOT to do... don't cheap out and not bother with a bolt-on puller. I screwed bolts through the thread holes in the pulley so as to push it off the shaft via the cog behind... this snapped off a part of the cog... big trouble. i was not able to get the cog off to replace it :( if anyone knows how to get the bottom crank cog off, please let me know.

buy a bolt-on puller and bolt it into the threads then drive centre bolt of puller onto the half threaded in main pulley bolt.