Hi Giys
I have got my hands on a 1lt ezy rear locker and diff, and I would like to know if you can install it into a 85 model 1.3 rear diff?
cheers
jaczook
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1LT Rear Ezy Locker into 1.3 Rear
No.
1.0 centres are not as strong as 1.3 but the axles are the same (rear)
It's not worth swapping to a 1.0 axle and loosing self adjusting brakes etc.
1.0 are 4.1:1 ratio too, so you can't just swap one end, you'd have to do the front as well.
Steve.
PS yes, I know you could use a 1.0 front and a 4.1:1 jimny rear in the front of a sierra but that's a lot of stuffing around to use a cheap locker in the rear.
1.0 centres are not as strong as 1.3 but the axles are the same (rear)
It's not worth swapping to a 1.0 axle and loosing self adjusting brakes etc.
1.0 are 4.1:1 ratio too, so you can't just swap one end, you'd have to do the front as well.
Steve.
PS yes, I know you could use a 1.0 front and a 4.1:1 jimny rear in the front of a sierra but that's a lot of stuffing around to use a cheap locker in the rear.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 2 guests