i have had a inspection at vic roads head orifice and they are calling for me to put the std shackles in or get a engineer cert. for them.
does any one know what that would cost?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
engineering extended shackles
Moderators: toaddog, TWISTY, V8Patrol, Moderators
engineering extended shackles
Ln106 dual cab lux 2.8 diesel
2inch lift, canopy, 32 pedes, barwork
2006 vz sv6, 3.6l high output v6
2inch lift, canopy, 32 pedes, barwork
2006 vz sv6, 3.6l high output v6
Put standard shackles back on and take it back to vicroads.
Engineers will be reluctant to pass extended shackles.
A cert normally runs upwards of $700 depending on what the engineer has to do.
Steve.
Engineers will be reluctant to pass extended shackles.
A cert normally runs upwards of $700 depending on what the engineer has to do.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
I got my roll cage, seats and wheels engineer certified for $240 in NSW. I think you'll have trouble finding an engineer who will pass extended shackles though....
- TEAM JACK IT UP AND RUN OVER SHIT -
FJ40 - Lexus V8, 38.5x16r15 Baja Claws, front lokka, rear LSD - None of it fitted to the car yet....
FJ40 - Lexus V8, 38.5x16r15 Baja Claws, front lokka, rear LSD - None of it fitted to the car yet....
once again, finding hard to find engineers in Vic willing to touch 4b's.. 4 I called I mentioned 4wd, and instantly werent interested.. Kev Williams doesnt even answer his phone anymore. :(Gwagensteve wrote:Put standard shackles back on and take it back to vicroads.
Engineers will be reluctant to pass extended shackles.
A cert normally runs upwards of $700 depending on what the engineer has to do..
Our club members don't seem to have problems finding engineers bogged, the big stumbling block is larger tyres.
I can't ever engineer the tyres I want on my car but might want the engine, chassis work etc certed. This doesn't seem a problem.
Some engineers in Vic have had lots of scrutiny from Vicroads for certing stuff they shouldn't - that might be some of the reason why some engineers don't like them.
Steve.
I can't ever engineer the tyres I want on my car but might want the engine, chassis work etc certed. This doesn't seem a problem.
Some engineers in Vic have had lots of scrutiny from Vicroads for certing stuff they shouldn't - that might be some of the reason why some engineers don't like them.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 144 guests