I've just dropped a 1.6 MPFI motor into my Sierra and am looking at making a snorkel up. I'm basically looking at running the pipe from the throttle body into an inline fliter, out the body and up the A Pillars. Now my question is where to put the Airflow Meter. Is it best behind the filter, next to the throttle body, somewhere in between, or even before the filter? Most stock vehicles put the AFM directly behind the filter or airbox, I'm guessing there is a reson for this? I vaugley remember hearing something about better throttle response the closer the AFM is to the TB, but I could be making this up...
Hints, tips, suggestions?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
AFM Position with snorkel...
I play in everything 
I've got a K&N Apollo "AirBox" http://www.knfilters.com/search/product ... =RC-5052AS that is basically a pod filter in a sealed box. I'll just mount it to the firewall with the supplied bracket up near the carbon cannister...
I've got a K&N Apollo "AirBox" http://www.knfilters.com/search/product ... =RC-5052AS that is basically a pod filter in a sealed box. I'll just mount it to the firewall with the supplied bracket up near the carbon cannister...
Who is online
Users browsing this forum: No registered users and 66 guests