Outer Limits 4x4 Board

I've just dropped a 1.6 MPFI motor into my Sierra and am looking at making a snorkel up. I'm basically looking at running the pipe from the throttle body into an inline fliter, out the body and up the A Pillars. Now my question is where to put the Airflow Meter. Is it best behind the filter, next to the throttle body, somewhere in between, or even before the filter? Most stock vehicles put the AFM directly behind the filter or airbox, I'm guessing there is a reson for this? I vaugley remember hearing something about better throttle response the closer the AFM is to the TB, but I could be making this up...

Hints, tips, suggestions?

you got stock airbox or play in sand/water? or are u thinking of donaldson style.

i have done the 3" connected to std mpfi airbox in mine.

I play in everything I've got a K&N Apollo "AirBox" http://www.knfilters.com/search/product ... =RC-5052AS that is basically a pod filter in a sealed box. I'll just mount it to the firewall with the supplied bracket up near the carbon cannister...

I wouldn't be putting it before the air filter as it may get damaged/blocked very easily.