Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
help need to no some things
Moderator: Moderators
help need to no some things
has any one done a 2 inch body lift on a tf rodeo if so what did you have to change ie brake lines. rad hose,cluch line. things like that any help would be good thanks
damo13,
2" body lift on a TF is a no brainer. The biggest problem you may experience is undoing any seized up bolts on the rear tray.
The brakelines on mine did not need modification. Re the steering, make sure you loosen the steering shaft at the steering box first. You may have to play around with the radiator and cowling. I left my radiator where it was and just lost the lower half of the cowling.
The bottom radiator hose in this instance had a bit of a kink but trimming it a bit will bring it back into trim.
Make sure you remove the brackets that secure the tub to the body (x2).. I threw mine away.
I suggest you get a couple of good solid lengths of wood to go under the side rails, a couple of hydraulic trolly jacks and another person to help.
I would start with the tub first then start on the body. Place the wood under the side sills (more surface area the better) and jack very slowly and monitor all bits an peices. Probably best to remove the radiator for maore space first, loosten the steering column and you will fine that the body lifts without a problem. Put the blocks in, drop the bolts through the floor and carefully lower.
I have to state that mine was the diesel but I assume that the petrol models are just as easy.
Cheers
Rainsey
2" body lift on a TF is a no brainer. The biggest problem you may experience is undoing any seized up bolts on the rear tray.
The brakelines on mine did not need modification. Re the steering, make sure you loosen the steering shaft at the steering box first. You may have to play around with the radiator and cowling. I left my radiator where it was and just lost the lower half of the cowling.
The bottom radiator hose in this instance had a bit of a kink but trimming it a bit will bring it back into trim.
Make sure you remove the brackets that secure the tub to the body (x2).. I threw mine away.
I suggest you get a couple of good solid lengths of wood to go under the side rails, a couple of hydraulic trolly jacks and another person to help.
I would start with the tub first then start on the body. Place the wood under the side sills (more surface area the better) and jack very slowly and monitor all bits an peices. Probably best to remove the radiator for maore space first, loosten the steering column and you will fine that the body lifts without a problem. Put the blocks in, drop the bolts through the floor and carefully lower.
I have to state that mine was the diesel but I assume that the petrol models are just as easy.
Cheers
Rainsey
2in body lift, 2" supension ,33" BGG Muddies, rear ARB Air locker... still scraping the ground!
Who is online
Users browsing this forum: No registered users and 0 guests