Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

AVM free wheeling hubs

Tech Talk for Mitsubishi owners.

Moderator: -Scott-

Forum rules
Post Reply
Posts: 40
Joined: Sun Jul 15, 2007 2:02 pm
Location: Tongarra, near Wollongong, AUS

AVM free wheeling hubs

Post by icemanpaj »

i was looking into getting free wheeling hubs for my nl 2.8 today because i have stripped the splines of the old hub assembly and off the drive shaft. but ARB catalogue says that they are only for up to 97 model...
does this mean that mine being a 99 model has different splines (coarser or finer) i'm not sure.
it will be a hell of a lot cheeper if i can get some AVM hubs because the wreckers want $220 for just one drive flange. this price seems a bit steep. seing as AVM ones are $227 for both sides.
are there any other brands??? i no my hilux has AISIN hubs but they came standard, so i dont think i could get them for my paj..

any body keen to shed some light on this topic???

andrew
Top
Posts: 165
Joined: Thu Mar 20, 2008 3:38 pm
Location: Brisbane

Post by Rockwolf »

Mate, I'm new but I remembered seeing this thread on Aisin hubs from a base model Gen 2 Triton or Paj in the Tech Bible.
bitsamissin wrote:Yes they will Kev, the outer splines are the same on all Gen 2's so the Aisin manual hubs of a base model Paj diesel or a Triton will fit.
They won't fit an NM onwards however as they have fixed (non removable) hub flanges.
Worth doing some more research, but seems like a stronger option than the AVM's, and cheaper again.

HTH, mate.
Lindsay. :)
Top
Posts: 40
Joined: Sun Jul 15, 2007 2:02 pm
Location: Tongarra, near Wollongong, AUS

Post by icemanpaj »

yeah cheers mate. i hit the search button rite after i wrote the post and found an abundance of info so its all pretty sweet i'll call around wreckers tomorrow...

cheers andrew
Top
Posts: 165
Joined: Thu Mar 20, 2008 3:38 pm
Location: Brisbane

Post by Rockwolf »

Sweet. :cool:

Lindsay.
Top
Posts: 315
Joined: Thu Jul 29, 2004 6:53 am
Location: South Australia

Post by cookie monster »

Get the genuine free wheel hubs off a base model paj or triton, they will fit your NL no probs. I run them on mine, approx $140 from wreckers, from memory.
cookie monster
99 GU Patrol Wagon 4.2td
Top
Posts: 40
Joined: Sun Jul 15, 2007 2:02 pm
Location: Tongarra, near Wollongong, AUS

Post by icemanpaj »

yep i've joined the manual locking club now.
i got the hubs off a 92 model triton for $150 + postage...
ill put them on in the morning.
cheers guys.

andrew
Top
Post Reply

Return to “Mitsubishi”

Who is online

Users browsing this forum: No registered users and 0 guests