I am running a set of 35 claws on my cruiser with a 2 inch suspension lift ite tyres rub when I have it at full lock. Am wondering if a 2 inch body lift will solve the problem and if it is difficult or expensive to do?
Cheers
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
35s rubbing on guard on a 79series
Moderators: toaddog, Elmo, DUDELUX
I ran castor bushes in the back of the front arms, and had the eye nmachined 2mm bigger, and made a spacer for th width, to move the axle forward 12mm on my 78 series, for 36 x 13 swampers on 10" rims.
Also just made up these below to move axle forward on my 80 for 37's, 12mm, to clear the mud flap, and welded them in place yesterday.
They fit on the chassis bracket for the front control arm.
Also just made up these below to move axle forward on my 80 for 37's, 12mm, to clear the mud flap, and welded them in place yesterday.
They fit on the chassis bracket for the front control arm.
Who is online
Users browsing this forum: No registered users and 64 guests