I know that both the TD and TB42 heads have the same exhaust ports and bolt pattern but. Does anyone know if the inlet sides are the same?
Would anyone be able to check the part numbers on TB/TD 42 manifold gaskets?
The reason I'm asking is that the original TD42 inlet manifold is pretty restrictive in its design and I have this idea of fitting the TB42e fuel injected manifold, or at the least the bottom half of it and building a plenum up from there to incorporate some Laminova water to air intercooler cores I managed to get hold of.
Any help would be appreciated.
Regards Andrew.
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
TD/TB42 inlet manifold gaskets.
Moderators: toaddog, TWISTY, V8Patrol, Moderators
TD/TB42 inlet manifold gaskets.
We are Tig welders, gravity doesn't worry us.
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
[img]http://www.studmonkeyracing.com/forums/smilies/weld.gif[/img]
unsure if the tb/td inlet port/studs are the same, but i know the acl gasket catolog lists different gaskets.
http://www.acl.com.au/web/aclwebsite.ns ... Format=gif
http://www.acl.com.au/web/aclwebsite.ns ... Format=gif
Who is online
Users browsing this forum: No registered users and 3 guests