TD/TB42 inlet manifold gaskets.
Posted: Thu Mar 27, 2008 9:38 pm
I know that both the TD and TB42 heads have the same exhaust ports and bolt pattern but. Does anyone know if the inlet sides are the same?
Would anyone be able to check the part numbers on TB/TD 42 manifold gaskets?
The reason I'm asking is that the original TD42 inlet manifold is pretty restrictive in its design and I have this idea of fitting the TB42e fuel injected manifold, or at the least the bottom half of it and building a plenum up from there to incorporate some Laminova water to air intercooler cores I managed to get hold of.
Any help would be appreciated.
Regards Andrew.
Would anyone be able to check the part numbers on TB/TD 42 manifold gaskets?
The reason I'm asking is that the original TD42 inlet manifold is pretty restrictive in its design and I have this idea of fitting the TB42e fuel injected manifold, or at the least the bottom half of it and building a plenum up from there to incorporate some Laminova water to air intercooler cores I managed to get hold of.
Any help would be appreciated.
Regards Andrew.