Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

nt body onto wt chassis

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 382
Joined: Thu Jan 17, 2008 2:59 pm
Location: Central coast NSW

nt body onto wt chassis

Post by zook4fun »

yes i have searched.

i need to know if a nt body will bolt onto a wt chassis.

my wt body is stuffed with rust and i have a nt body with no rust in it. both hare hard tops

i don't want to get the wt body off and find out i have wasted my time.
cheer up emo kid
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

As long as the 'new' (NT) body was a 1.3 you should be right.
Top
Posts: 382
Joined: Thu Jan 17, 2008 2:59 pm
Location: Central coast NSW

Post by zook4fun »

its a 82, 1ltr body
cheer up emo kid
Top
Posts: 3940
Joined: Wed Dec 27, 2006 1:09 pm
Location: Sunshine Coast Qld

Post by want33s »

I have just finished putting a NT 1.3 body on a one litre NT chassis and it was a bit of a stuff around. The mount bolts are in different places.
In your case there will be more problems like the brake booster, the floor etc.
Not impossible to overcome but much easier if you get a 1.3 body.
Top
Posts: 3098
Joined: Sat May 28, 2005 3:22 pm
Location: Melbourne, Australia

Post by PJ.zook »

1.3 NT's bolt straight onto 1.3 WT's. There are a few differences like brake booster bolt patterns are slightly different, rear bar doesnt bolt back on without mods to mounts, etc
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 1 guest