Outer Limits 4x4 Board

yes i have searched.

i need to know if a nt body will bolt onto a wt chassis.

my wt body is stuffed with rust and i have a nt body with no rust in it. both hare hard tops

i don't want to get the wt body off and find out i have wasted my time.

As long as the 'new' (NT) body was a 1.3 you should be right.

its a 82, 1ltr body

I have just finished putting a NT 1.3 body on a one litre NT chassis and it was a bit of a stuff around. The mount bolts are in different places.
In your case there will be more problems like the brake booster, the floor etc.
Not impossible to overcome but much easier if you get a 1.3 body.

1.3 NT's bolt straight onto 1.3 WT's. There are a few differences like brake booster bolt patterns are slightly different, rear bar doesnt bolt back on without mods to mounts, etc