Drive shaft Vibe after 5 inch lift ?

[GUEEY]

Almost finished new lift.

After some testing on the weekend i now have some tailshaft vibration!
i am picking up some 16+ trailing arms for the rear this week which sould help correct pinion angle in the rear.
For the front i think some gearbox spacers may help.

i am open to other ideas or advise!

Thanks

Grant

[Rampage]

the rear will be fixed with the lower arms! i have these but ther eon my workshop floor as my vibrations in the rear are VERY minimal(Im lazy) the front should be ok if you used drop boxs as these would have spaced it down 8mm! i run 7" lift and the front has nothing else done to it! prob wouldnt advise top speeds with it at such a angle but it has been fine for me up to 70kmh

[GUEEY]

the rear will be fixed with the lower arms! i have these but ther eon my workshop floor as my vibrations in the rear are VERY minimal(Im lazy) the front should be ok if you used drop boxs as these would have spaced it down 8mm! i run 7" lift and the front has nothing else done to it! prob wouldnt advise top speeds with it at such a angle but it has been fine for me up to 70kmh

I have drop boxes already, but the vibration came after i went from 4 inch to 5 inch .thats why i thought a gearbox spacer kit between the drop box plate and the cross menber would help it .
Truck drives brilliant with Drop boxes!!!!!

Grant.

[Rampage]

yeah it may help! im not 100% sure! im still thinking that the angle that the front shaft is on isnt going to be corrected eaisly! let me know how you go as i may do this to help save the uni joints a little

cam

[Nelso]

Almost finished new lift.

After some testing on the weekend i now have some tailshaft vibration!
i am picking up some 16+ trailing arms for the rear this week which sould help correct pinion angle in the rear.
For the front i think some gearbox spacers may help.

i am open to other ideas or advise!

Thanks

Grant

Go back to a 4 inch lift, problem solved.