Well failed a blue slip and was curios to know what the issue is.
Can pull the key out of the ignition whilst the car is running.
Can i just pull it apart and fix it or will i need a new barrel replacement?
Cant find an aftermarket company to use to replace the barrel and SUZUKI charged me $240 as the ignition barrel comes as a complete steering column kit! WTF?
Will a Vitara one fit? $79 del?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
***IGNITION BARREL REPLACEMENT HELP***
Yep, should be a key wear problem. If your key is that worn, you'll need to get the key cut from code, which is a bit exxy, but much less hassle than changing the barrel.
The barrels can be swapped off the column but they use shear head bolts so they can be a bitch to undo. If the key replcement doesn't work try a wrecker for a barrel and key.
Steve.
The barrels can be swapped off the column but they use shear head bolts so they can be a bitch to undo. If the key replcement doesn't work try a wrecker for a barrel and key.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
i had the same issue taking mine over... i got a new key cut and problem solved. youll notice on your key, if you face it so the bit you hold is on the right and the tip is pointing left, it tapers up, dips down, rises up again and levels out for about 4mm before dropping down again... in that 4mm level part, there should be a 1.5mm wide by 1mm high notch coming up - thats the bit the barrel grabs... so you could get a cheapy key cut and ask the guy to carefully accentuate that notch.
the key i got done is a match to a ford of some description (same shape as zuk key) and works great... $8 well spent =)
the key i got done is a match to a ford of some description (same shape as zuk key) and works great... $8 well spent =)
The worst thing about censorship is ███████.
If you pop the door lock out you will find a code written on the side, if you tell a good key cutter they cn cut you a new one.
Cost me $20-25 when i lost the keys to the starion
Oh the code is normally on the drivers side door too.
Cost me $20-25 when i lost the keys to the starion
Oh the code is normally on the drivers side door too.
Cut down Sierra cab on extended LWB chasie running, Hilux front and Bundy back, with a 4AGZE should be finished about umm soon. A 60 Series work truck and some go fast toys too.
Who is online
Users browsing this forum: No registered users and 120 guests