Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

caster correction plates

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 14
Joined: Sun Feb 25, 2007 4:56 pm
Location: Canberra

caster correction plates

Post by Daniel gq »

lm thinking of installing 5deg caster correction plates myself, just wondering how hard it is to do?
l also have access to a hoist. Any help would be apreciated
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

easy to install you just need to drill the holes throught the existing diff plates
Top
Posts: 51
Joined: Mon May 14, 2007 5:20 pm
Location: sydney

Post by brettsGQ »

easy to do but to do it properly you need a right angle drill attatchment to drill the drivers side holes
my brother and his mates overcome this problem by just welding the top of the plate to the mounting bracket their cars passed engineering and have all coped a punnishment without a problem
93 GQ patrol td42 turbo'd ,auto, 4 in springs, 2 in body 35 claws, front locker & 4.6's, wheelers fabrications bar work all round.........
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

If you drill the outside hole on the drivers side you could bolt the inside plate where the arm sits in the gap and just drill through the first hole and use the caster plate as a guide.

Hope that was clear.

anotherway to say it would be bolt both plates on the right hand side of the plates they bolt to drill through the top holes.
Top
Posts: 350
Joined: Sun Mar 02, 2008 10:12 pm
Location: Mackay Qld

Post by Tomo_89 »

Like brett said just weld it, mines been going good for over 2 years now with no problems and it has copped heaps of punishment in that time
hope this helps.

Thomas.
Top
Posts: 1857
Joined: Fri Feb 02, 2007 12:16 am
Location: ipswich

Post by nastytroll »

so how would you remove you're caster plates?
Top
Posts: 350
Joined: Sun Mar 02, 2008 10:12 pm
Location: Mackay Qld

Post by Tomo_89 »

use an angle grinder... but why would you want to remove them?
Top
Posts: 1578
Joined: Wed Aug 31, 2005 12:27 am
Location: In The Good Country

Post by sudso »

Tomo_89 wrote:use an angle grinder... but why would you want to remove them?
To put drop arms in silly.
Bordertrek 4X4 & Fabrication
0400 250 734 Bordertown SA
I love terra firma-the less firma the more terra
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 144 guests