Page 1 of 1
1" master cylinder, which 80's Patrol is it from?
Posted: Wed Apr 30, 2008 12:15 am
by sco_aus
I am looking at doing a master cylinder upgrade on my Datsun and have heard one of the Patrol masters is 1" and will pretty much bolt straight on. Im just wondering if anyone knows which one is.
Posted: Wed Apr 30, 2008 4:00 am
by RMP&O
Well...I do know the MQ/MK/GQ all share the same bolt pattern for the MC. So if bolt pattern is the same I assume they are all the same diameter. Master Vac is different though...
Some things do inter change in the older Nissan/Datsuns. For example I used a 280Z clutch slave cylinder on my 83 MQ. It bolted right up and other than rod is a perfect match.
Posted: Wed Apr 30, 2008 8:40 am
by MrGenius
JB1419
79 Patrol
Posted: Wed Apr 30, 2008 2:02 pm
by sco_aus
RMP&O wrote:Well...I do know the MQ/MK/GQ all share the same bolt pattern for the MC. So if bolt pattern is the same I assume they are all the same diameter. Master Vac is different though...
Some things do inter change in the older Nissan/Datsuns. For example I used a 280Z clutch slave cylinder on my 83 MQ. It bolted right up and other than rod is a perfect match.
Well the thing with that is, the 120Y, 240Z, 260Z, 280z/x all had the same bolt pattern on MC, but the 120,240,260 all had 7/8th MCs, 280z/x had 15/16th MCs and if the Patrol has a 1" that bolts on, then I may have just discovered another bolt on upgrade for these Datsuns.
JB1419
79 Patrol
Thanks mate, now to find out which one im about to purchase.
Cheers guys
Posted: Mon Jun 16, 2008 3:56 pm
by sco_aus
Well after doing a fair amount looking around, Nissan claim that JB1419 from the '79 Patrol is an aftermarket part number and they would need VIN number to be able to identify the exact part im looking for. So would anyone here be able to supply that?
cheers
Scott