Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

4.3s or 4.6s for GU AUTO

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Post Reply
Posts: 108
Joined: Sun Sep 26, 2004 8:50 pm

4.3s or 4.6s for GU AUTO

Post by ads80 »

ive got a gu auto running 35's, wanting to hear what people have run to best bring back to std on the speedo. Have had different oponions from different people :?
80 series with chrome wheelnuts !!
Posts: 165
Joined: Thu Mar 20, 2008 3:38 pm
Location: Brisbane

Post by Rockwolf »

Depends on what the overall increased tyre diameter is for the 35's over stock - the diff ratio needs to be approximately the same increase over your current ratio to correct the speedo. Say for 20% higher overall diameter, your diff ratios need to be 20% higher to correct.

Otherwise, maybe there are speedo corrector kits out there, if your desired driving characteristics aren't met by the diff change (or cost is a concern)?
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Re: 4.3s or 4.6s for GU AUTO

Post by bogged »

ads80 wrote:ive got a gu auto running 35's, wanting to hear what people have run to best bring back to std on the speedo. Have had different oponions from different people :?
what are your current diffs?

if they are 3.9 then go with 4.3's
4.1 go 4.6 etc
Posts: 108
Joined: Sun Sep 26, 2004 8:50 pm

Post by ads80 »

not so concerned about the speedo, just need to get it back to std so the auto will shift properly and the car will tow better, already have a speedo converter in the car but this caused problems :cry: the auto senses from both tailshaft and the speedo, so when you change one and not the other the auto gets a little confused
80 series with chrome wheelnuts !!
Posts: 108
Joined: Sun Sep 26, 2004 8:50 pm

Post by ads80 »

gu autos have 3.9, hoping to hear from someone who has done the change
80 series with chrome wheelnuts !!
Posts: 601
Joined: Mon May 24, 2004 9:50 am
Location: south eastern melbourne

Post by GUEEY »

ads80 wrote:gu autos have 3.9, hoping to hear from someone who has done the change
I have a Gu 4.2 TD and i run 35s all the time.
i fitted 4.3s to my truck, they were 3.9s originally. 4.3s are perfect!!!!

Grant.
GU III TD42T UFI18G Cross Country IC, 20 PSI. Neeeeeed mooooore Fueeeeeel.
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

ads80 wrote:gu autos have 3.9, hoping to hear from someone who has done the change
4.8s have 3.5's ;)
Posts: 574
Joined: Wed Aug 17, 2005 11:49 am
Location: NZ

Post by nzdarin »

What auto? I assume it isn't the 4 speed as in the GQ? If it is then I'd say talk to Wholesale Automatics and get a valve body for it!
93 Nissan Pathfinder / Terrano Turboed VH45, GQ Trans and T-case, coil overs, hydraulic winch and fair bit of other stuff. (Currently a pile of parts in the workshop)
Posts: 693
Joined: Sun Sep 26, 2004 2:37 pm
Location: Rochedale South - Brisbane

Post by benhl »

As GUEEY Said

I also run 315/75's all the time and originally had 3.9's. I have bought the 4.3's to bring the ratio back to std for speedo correction and off the mark up hill starts. Sure - they're still sitting on the bench waiting to in with the lockers but hey they're there!

Will also be putting in a replacement 5th gear cog in the box to keep the advantages of bigger tyres (lower revs = better fuel economy) on 5th gear highway cruising in the future also.
GU 4.2 TD Garrett BB Hi-flow, M8274 + Bells & Whistles with plenty of fruit still on the list!
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

benhl wrote:As GUEEY Said

I also run 315/75's all the time and originally had 3.9's. I have bought the 4.3's to bring the ratio back to std for speedo correction and off the mark up hill starts. Sure - they're still sitting on the bench waiting to in with the lockers but hey they're there!

Will also be putting in a replacement 5th gear cog in the box to keep the advantages of bigger tyres (lower revs = better fuel economy) on 5th gear highway cruising in the future also.
are you going to go with the Marks Adapters different ratio 5th gear??
Posts: 693
Joined: Sun Sep 26, 2004 2:37 pm
Location: Rochedale South - Brisbane

Post by benhl »

i think so... i haven't really looked too far into it - just heard around the traps that it is the way to go,
GU 4.2 TD Garrett BB Hi-flow, M8274 + Bells & Whistles with plenty of fruit still on the list!
[b][color=red]\ m / ( > . < ) \ m /[/color][/b]
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

benhl wrote:i think so... i haven't really looked too far into it - just heard around the traps that it is the way to go,
apparently the 5th gear is near on $800 :shock:
Posts: 41
Joined: Sat Jun 23, 2007 6:59 pm
Location: melbourne

Post by truckzilla »

diff ratio's are the best way to go i went from 4.1's to 4.65's and on 37's the car still drives like stock on the freeway --- have checked the speedo with a gps and its bang on .

same on 35's only runs about 120rpm more at 110k's

wouldn't mind knowing more about a new 5th gear if anyone has tryed it .
like all GU's its doing about 2500rpm at 110k's and not getting the best fuel consumption
off road "size DOES matter"
Posts: 45681
Joined: Wed Nov 27, 2002 10:13 am

Post by bogged »

truckzilla wrote:diff ratio's are the best way to go i went from 4.1's to 4.65's and on 37's the car still drives like stock on the freeway --- have checked the speedo with a gps and its bang on .

same on 35's only runs about 120rpm more at 110k's

wouldn't mind knowing more about a new 5th gear if anyone has tryed it .
like all GU's its doing about 2500rpm at 110k's and not getting the best fuel consumption
http://www.marks4wd.com/products/gearma ... -gears.htm
Post Reply

Who is online

Users browsing this forum: No registered users and 1 guest