Page 1 of 1

gu tyre question

Posted: Fri May 02, 2008 12:01 am
by narns1mav
just looking for some answers about running 35 / 36 simex on a gu with a 3 inch spring lift ie what needed to be done if anything and where they hit if they do

thanks

Re: gu tyre question

Posted: Fri May 02, 2008 1:12 pm
by bogged
narns1mav wrote:just looking for some answers about running 35 / 36 simex on a gu with a 3 inch spring lift ie what needed to be done if anything and where they hit if they do

thanks
http://www.outerlimits4x4.com/phpBB2/search.php :)

Posted: Fri May 02, 2008 6:53 pm
by narns1mav
yeah good on ya i have allready had a search as we all do

is was hoping some body was running a gu with simex's and could tell me first hand

Posted: Sat May 03, 2008 3:21 am
by segan1
Im running 35" simexs on 16 x8 rims witha 4" lift and dont have a problem and i dont see you hving a problem with a 3" lift. It might just scrape on the inner rear gauds on full flex but only just. Nothing to worry about.
Was at the local 4x4 shop the other day and lined up 35" simex with the 36" and you would be lucky if there was 1/4 inch between them.
Go either way and you wont have a problem.
Fantastic tyre you wont be dissapointed.