Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Factory locker diff centers
Moderators: toaddog, Elmo, DUDELUX
Factory locker diff centers
Just wondering if any of the diff centers with factory difflocks will fit into the axle housings in a BJ42 (with the obvious exception of the front diff in the 80 & 100 series)? And if not why not?
yes they will, although you will need a longer splined inner axle on one of the sides, as the factory lockers rely on this.
these aren't too hard to come across, any 40 or early 75 series with factory lockers will have the right axles, and the short side of the 60 series will work too. there is a good link about it on the tech page of www.ih8mud.com
these aren't too hard to come across, any 40 or early 75 series with factory lockers will have the right axles, and the short side of the 60 series will work too. there is a good link about it on the tech page of www.ih8mud.com
Spit my last breath
Who is online
Users browsing this forum: No registered users and 1 guest