Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

vitara clutch cable adjustment

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Forum rules
Post Reply
Posts: 3
Joined: Sat Dec 16, 2006 7:42 pm
Location: western sydney, NSW

vitara clutch cable adjustment

Post by joyride »

hey guys,

my clutch cable needs to be readjusted and i need some pointers to tighten it up; can anyone point me to where the cable lies? i dont have a handbook manual as i only bought the vitara this morning and i barely made it home from the RTA.
Top
Posts: 801
Joined: Fri Sep 23, 2005 12:56 pm
Location: Darwin N.T

Post by MUD-PIGSIERRA »

Start under the 4by from just just behind the drivers side wheel, you'll see where the gear box and bell housing meet the engine. If it does need adjusting might also want to check the bracket that pivots on the spline into the bell housing as the brackets sometimes slip when heavy duty clutches are installed and the teeth get wrecked on the bracket . If not also check up near the fire wall as to where the clutch cable goes in as this area is also common for cracking and breaking.
..wrench, wheel, wreck repeat..

check out the action @ http://www.darwin4x4.net
Top
Post Reply

Return to “Suzuki”

Who is online

Users browsing this forum: No registered users and 21 guests