Outer Limits 4x4 Board

hey guys,

my clutch cable needs to be readjusted and i need some pointers to tighten it up; can anyone point me to where the cable lies? i dont have a handbook manual as i only bought the vitara this morning and i barely made it home from the RTA.

Start under the 4by from just just behind the drivers side wheel, you'll see where the gear box and bell housing meet the engine. If it does need adjusting might also want to check the bracket that pivots on the spline into the bell housing as the brackets sometimes slip when heavy duty clutches are installed and the teeth get wrecked on the bracket . If not also check up near the fire wall as to where the clutch cable goes in as this area is also common for cracking and breaking.