Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
Rear disc brakes on a surf
Moderators: toaddog, Elmo, DUDELUX
Rear disc brakes on a surf
Just wondering how i can get some disc brakes happening on the rear end of my surf. its a 93 ssrx. has anyone done it before?
Wanted.... 4.88 or 4.56 front GQ diff center. Also wanted... GQ rear diff complete.
People hav done it before but it is all custom fab work to get the handbrake setup and rotor/caliper mounts happening. Ther is kits I hav seen on U.S sites but they mostly use chevy calipers which wud be hard to get pads for here. I think TJM hav a kit also now actually but it wud cost a bit.
If u wanted to u cud get a 95 series prado rear axle housing which hav disc standard and fabricate new shock and coil mounts to fit it under the surf, prados run the same 8" diff centre as the surf and r 5link coil also. It is a little wider but nothing worthing worrying about I dont think. Then u cud get a 1" bore V6 surf/4runner master cylinder which will bolt onto ur exsistng booster (or get the bigger V6 booster also) and a set of bigger V6 front calipers and ur brakes will be finished.
If u wanted to u cud get a 95 series prado rear axle housing which hav disc standard and fabricate new shock and coil mounts to fit it under the surf, prados run the same 8" diff centre as the surf and r 5link coil also. It is a little wider but nothing worthing worrying about I dont think. Then u cud get a 1" bore V6 surf/4runner master cylinder which will bolt onto ur exsistng booster (or get the bigger V6 booster also) and a set of bigger V6 front calipers and ur brakes will be finished.
Who is online
Users browsing this forum: No registered users and 2 guests