Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
engine fo 89 vitara
engine fo 89 vitara
hey people... just need some advise on wats the best egine to put in my 89 swb vitara... i got the 1.6l carb engine with a weber but its runnin crap... i want some thing fuel injected... my ideas are v6 commodore, gti swift, ca18, 2.0l v6 vitara, 1.6 fuel injected vitara...
please let me know wat you guys have done to yours...
please let me know wat you guys have done to yours...
engine fo 89 vitara
i saw that... not to bad... i was hoping to do something a little different....
Re: engine fo 89 vitara
Commonwhore = too heavy.Rob837 wrote:i want some thing fuel injected... my ideas are v6 commodore, gti swift, ca18, 2.0l v6 vitara, 1.6 fuel injected vitara...
please let me know wat you guys have done to yours...
GTi = too little torque.
CA18 = heavy, costly to adapt.
2.0 V6 = Again costly to adapt and unreliable and extra rego for next to no real power increase over J20 4 cyl.
1.6 EFI Vit = Bolt in, readily available & reliable
Very well, if you have lots of money and access to a suitable gearbox etc.
Generally though, diesels are not well suited to suzukis- narrow rev range and heavy.
Steve.
Generally though, diesels are not well suited to suzukis- narrow rev range and heavy.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
h20 v6 would be great, don't know where people are gettin the idea they are unreliable, much prefer that over a shitter j20 motor. h20 half cuts are starting to appear cheap from japan.put over 350,000 k's on one of mine....still couldn't kill it. wouldn't be much more to adapt than a j20.[ and yes.....i have replaced a j20 with a suzuki v6...]
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
if you find someone to mount the v6 pm me and i can modify the loom for you. h series are a bit tricky.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Who is online
Users browsing this forum: No registered users and 2 guests