Page 1 of 1
Rejetting carbies and timing
Posted: Fri Feb 20, 2004 2:35 pm
by nicbeer
I am running a G13b with a sports cam,extractors,2" exhaust and filter, and was wondering if anyone is running similar and what timing they use.
Anybody played with the jetting of the carbies as well???
cheers
Re: Rejetting carbies and timing
Posted: Fri Feb 20, 2004 5:33 pm
by Luigi Malone
nicbeer wrote:I am running a G13b with a sports cam,extractors,2" exhaust and filter, and was wondering if anyone is running similar and what timing they use.
Anybody played with the jetting of the carbies as well???
cheers
I have a similar setup, and as I use an adjustable camsprok I just set the dizzy to where it runs best. But at about 10* advanced is a good place to be.
Jetting a sierra carb? I didn't think you could get jets or change anything in there. The best change is to another carb.IMO
LM
Posted: Sat Feb 21, 2004 6:51 pm
by nicbeer
A fine drill can work wonders but just wondering if anyone has done it.
10deg sounds bout right
cheers