Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
NEW TO THE 4x4 scene
NEW TO THE 4x4 scene
Hey all I am new to the 4x4 scene and was just wondering if I could get some friendly advice on a slight issue that I have. I own a Suzuki sierra 1993 wt 1.3 hardtop and have just recently bought a snake racing body lift and also put in a 2.5 inch suspension lift my only problem is I am getting nervous that I might roll my pride and joy (zook) and be left with out a car if I lift it too high I was wondering if there is any tips and trick that you can do to avoid this, I have thought about getting a roll cage and am sourcing around to find one that fits the budget. One of my mates also encouraged me to get spacers and put a big heavy tool box in the back of it to weigh it down any advice would be greatly appreciated thanks. I will get some pics up of it as soon as it comes out of the shop should only be a couple of days.
Link
Link
Hi Link....
Not a Sierra owner so others will be able to provide you with actual real world feedback, but some general observations :
1/ Have you checked out the legality of your body, suspension and tyre combination ? Its my understanding that QLD is very tough on this sort of thing.
2/ Roll cages are not simple or cheap to have done properly/legally. Mounting, clearances/materials are very important. Bolting it to the floor may be simple but may not provide the required strength in the event of an accident. A poor cage might make you feel good right up to the point when you need it.
Enjoy your Sierra and your offroading.
Not a Sierra owner so others will be able to provide you with actual real world feedback, but some general observations :
1/ Have you checked out the legality of your body, suspension and tyre combination ? Its my understanding that QLD is very tough on this sort of thing.
2/ Roll cages are not simple or cheap to have done properly/legally. Mounting, clearances/materials are very important. Bolting it to the floor may be simple but may not provide the required strength in the event of an accident. A poor cage might make you feel good right up to the point when you need it.
Enjoy your Sierra and your offroading.
( usual disclaimers )
It seemed like a much better idea when I started it than it does now.
It seemed like a much better idea when I started it than it does now.
d
Link, welcome to the scary world of the sierra.
my zook, is a 3inch body lift, and prolly 2 inch lift springs, with 32 inch tyres. so its pretty damn tall, it does lean over around corners etc, but you just have to drive accordingly, i have driven some silly angles offroad, come close to going over, but not done so as yet (fingers crossed)
wheel spacers are illegal from what i understand, how ever if u are wanting a little more width legally.. look at offset rims, i got my stock sierra rims cut and flipped (had the center taken out, turned around and welded back in, this gave me, from memory, another 2 or 3 inches of width per side).
As MightyMouse said, it would be wise to check with the regulations of the state that you are in, NSW are pretty flexible, but i have heard, that VIC and QLD, are tight on the rules.
but again welcome, you have a made a wise choice in the Sierra
-Pyro
my zook, is a 3inch body lift, and prolly 2 inch lift springs, with 32 inch tyres. so its pretty damn tall, it does lean over around corners etc, but you just have to drive accordingly, i have driven some silly angles offroad, come close to going over, but not done so as yet (fingers crossed)
wheel spacers are illegal from what i understand, how ever if u are wanting a little more width legally.. look at offset rims, i got my stock sierra rims cut and flipped (had the center taken out, turned around and welded back in, this gave me, from memory, another 2 or 3 inches of width per side).
As MightyMouse said, it would be wise to check with the regulations of the state that you are in, NSW are pretty flexible, but i have heard, that VIC and QLD, are tight on the rules.
but again welcome, you have a made a wise choice in the Sierra
-Pyro
Zooks are for people that aren't afraid of angles and who have nothing to compensate for
[O]=TOYOTA=[O]<< OL Build up
[O]=TOYOTA=[O]<< IH8MUD Build up
[O]=TOYOTA=[O]<< OL Build up
[O]=TOYOTA=[O]<< IH8MUD Build up
Link,
That's a pretty common combination you have there. Stability should be OK, but you don't mention what size tyre, rim and rim offset your running. This will have a big bearing on stability.
E.g - My trayback runs about 2" of spring lift, 2" body lift, and 34X9 swampers on 16X4.5 stock rims. When it was narrow track, it was stupid tall and narrow, and it fell over all the time. I've now added 80mm of overall width and it doesn't want to fall over anywhere near as much.
If you're running say a 31 10.5 on a 7" rim with around 25mm of offset (like speedy rims) you should be pretty good.
I relation to a roll cage, if you fall over you're still going to total your car. a good exo cage will prevent this but will add lots of weight up high. In any case, functional roll cages are very expensive. There's lots of material and labour in them.
If your concerned about on road, just slow down. If you're concerned about off road, look into the suzuki club in your area so you can go wheeling with guys with other cars set up just like yours. You'll soon get a sense of what you can get away with.
Adding weight to the rear won't help in a meaningful way. The load deck is only just below the cars centre of gavity so you'd have to add a lot of weight there to make much difference, and sierras performance drops off quickly with weight in them.
Steve.
Steve.
That's a pretty common combination you have there. Stability should be OK, but you don't mention what size tyre, rim and rim offset your running. This will have a big bearing on stability.
E.g - My trayback runs about 2" of spring lift, 2" body lift, and 34X9 swampers on 16X4.5 stock rims. When it was narrow track, it was stupid tall and narrow, and it fell over all the time. I've now added 80mm of overall width and it doesn't want to fall over anywhere near as much.
If you're running say a 31 10.5 on a 7" rim with around 25mm of offset (like speedy rims) you should be pretty good.
I relation to a roll cage, if you fall over you're still going to total your car. a good exo cage will prevent this but will add lots of weight up high. In any case, functional roll cages are very expensive. There's lots of material and labour in them.
If your concerned about on road, just slow down. If you're concerned about off road, look into the suzuki club in your area so you can go wheeling with guys with other cars set up just like yours. You'll soon get a sense of what you can get away with.
Adding weight to the rear won't help in a meaningful way. The load deck is only just below the cars centre of gavity so you'd have to add a lot of weight there to make much difference, and sierras performance drops off quickly with weight in them.
Steve.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
Who is online
Users browsing this forum: No registered users and 1 guest