Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Fitting a GU 2.8 into a GQ 2.8 help!!

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 35
Joined: Mon Apr 28, 2008 2:02 pm
Location: Sydney

Fitting a GU 2.8 into a GQ 2.8 help!!

Post by baxy1 »

Hi,
We are putting a GU 2.8 into a GQ and have run into a few little snags.

1. Firstly the fly by wire accelerator setup, does anyone know if it can be swapped over?
2. Dual mass flywheel, can it be swapped for the solid gq flywheel and clutch?

Any help would be greatly appreciated.
Baxy
Top
Posts: 195
Joined: Sun Apr 20, 2008 10:10 pm
Location: sunshine coast

fly wheel

Post by patrol28 »

yeah my mate did his gu 2.8 clutch and it dear as so he got a fly wheel off
a gq and a clutch kit and bobs ur uncle .. hope it helps dont no jack bout the other
https://www.suspensionstuff.com.au/shop/product_info.php?cPath=137_40_69&products_id=996
Top
Posts: 1258
Joined: Wed Mar 21, 2007 7:49 pm
Location: Mornington/ Victoria

Contact:
Contact PGS 4WD

Post by PGS 4WD »

You'd have to put the mechanical pump from the GQ onto the later engine as fuelling is computer controlled to the electronic pump via the throttle position and mass air.

Joel
-Pre trip inspections/ servicing
-Suspension/ custom modifications
-4wd Dyno & tuning
-Qualified mechanics
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests