Page 1 of 1

ARB Compressor, install location.

Posted: Sun Feb 22, 2004 5:34 pm
by Draven
Hey guys,

Ive got a GQ, TB42 with gas, duel batteries, cruise etc etc. Ive just gone out and grabed myself a ARB air compressor in prep for some diff locks.

I was just wondering where everyone else has managed to squeeze their compressor?....I mean im just about out of room :)

I would prefer to keep it under bonnet as I use under the seats for other stuff.

Thanks

Posted: Sun Feb 22, 2004 6:05 pm
by turps
Mines mounted under the drivers seat, with the factory tool kit.
With a tree trunk protecter and snatch strap under the passenger seat.
All worked well until the ARB Comp (old one) broke the shaft off the motor (anyone know if these can be rewelded??).

Posted: Sun Feb 22, 2004 6:25 pm
by Area54
Passenger side, in the corner of the firewall and the inner fender, bolted to the inner fender.. This is the preferred position for most ARB fitters, as it works well with the looms. You will need to move the vacuum tank (if fitted) for the clutch.

Posted: Sun Feb 22, 2004 9:22 pm
by bogged
turps wrote:Mines mounted under the drivers seat, with the factory tool kit..


Yup, mines under the drivers seat... works well, and reaches all tires piss easy.

Posted: Sun Feb 22, 2004 9:27 pm
by MRGQ
Mines under passenger front seat, works well, been there for about 4 years no problem.

Posted: Mon Feb 23, 2004 9:10 am
by bazzle
Under Drivers seat.
Also stops crap behind comp sliding forward under your pedals on steep hills.
Runs cooler there and breathes clean air :)


Bazzle :cool:

Posted: Mon Feb 23, 2004 9:13 am
by bazzle
Under Drivers seat.
Also stops crap behind comp sliding forward under your pedals on steep hills.
Runs cooler there and breathes clean air :)


Bazzle :cool: