A friend has just lunched a CV. It's an IFS 100s with a pair of ARBs.
Q1 - Is there a recommended upgrade CV? I have heard of Longfield but have also heard of accelerated wear issues with these.
Q2 - Should he even go down this road? Do the ARBs support the CW&P enough or would he be better off leaving the fail point in the CVs?
cheers
Dan
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
IFS 100 series CV upgrade?
Moderators: toaddog, Elmo, DUDELUX
IFS 100 series CV upgrade?
Everybody warned me. I listened hard and nodded. I shuddered. I wept.
I bought a Landrover anyway :D
I bought a Landrover anyway :D
its good to have the front arb for strength of carrier to support crownwheel, and prevent failures, and solid pinion spacer as well, for the final touch, but if he leaves the front blue button out, he shouldnt have to much trouble with cv's.
If he does need to put it in, it should be with light throttle, and wheels straight .
If he does need to put it in, it should be with light throttle, and wheels straight .
Who is online
Users browsing this forum: No registered users and 0 guests