Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

HOME MADE TUBE BENDER?

General Tech Talk

Moderators: toaddog, TWISTY, V8Patrol, Moderators

Forum rules
Post Reply
Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

HOME MADE TUBE BENDER?

Post by dano80 »

Just checked out Pro tools website stating they will e-mail plans to whoever responds, for their D.I.Y. Tube bender.

Anyone had a crack at building their own lately, and with how much success?


Cheers, Dano.

P.S. was looking to buy a cheapie from trade tools, but have heard mixed report of these, especially those cheap formers/dies.
It's for making exo-cages.
Top
Posts: 709
Joined: Thu Sep 22, 2005 7:49 pm
Location: campbelltown

Post by Mousie »

hey i got a cheap bender 100 $ job with a good die and works a treat,
R.A.G, Ruff As Gutts 4x4 club :P
http://www.rag4x4.com/
Top
Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

Post by dano80 »

Tell me more mousie.

Is it a $100 bender with an expensive die in it...or
Is it a $100 bender with the good die included?
What brand bender?

Cheers, Dano.
Top
Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

Post by dano80 »

Hold the phone........
What this JD2, model 3 bender like? Looks like hand operated, but I've heard good reports of these.

All for $295, according to the website. Might be the go. Have to hit the missus up for the Birthday coming up!

Dano.
Top
Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

Post by dano80 »

Bloody U.S. websites.

Was getting all excited, then realised I still have to get over here.

Oh well i'll keep on searching.

Dano.
Top
Posts: 6314
Joined: Wed Jun 18, 2003 9:49 am
Location: Newcastle, NSW

Contact:
Contact Hekta

Post by Hekta »

If you're looking for the cheap option. A cheap bender with good quality die is the go. Dawn dies seem to be quite popular.

JD2 bender is the shizz. They are available here. I do know OPW sells them, and maybe others.
wtf is an acronym

[color=yellow]Ctrl + W[/color]
Top
Posts: 2820
Joined: Sun May 25, 2003 10:04 am
Location: Redbank Plains, QLD

Post by Daisy »

Hekta wrote:
JD2 bender is the shizz. They are available here. I do know OPW sells them, and maybe others.
price is quite good for those benders...

I built my own speedwerx bender, its not that hard.. the dies are expensive from speedwerx themselves (700 bux :x )

Dies can be cnc machined but you wont see any savings until you make more than just one.

OPW sell quite a few different size dies. Have a look in the Dirtcomp mag - usually the first page you open has the info about the JD2/3 benders.

Tom
custom bar work, 4x4 parts, trailers, anything out of steel/alloy :D
Top
Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

Post by dano80 »

Might have to look at going this way, thanks Tom. Is it as simple as the bender looks, or is it a lot more involved?

Did you get the dies from OPW? Any Pics of your bender???? please???

I should have already stipulated that I prefer the draw through benders, Not the bow and arrow style, more common amongst the cheaper ones.
From what I hear they are alot better for accurate smooth bends?


Cheers, Dano.
Top
Posts: 1897
Joined: Thu Aug 05, 2004 6:24 am
Location: of the best barwork is at www.bolsys.com.au

Post by 80lsy gq »

dano80 wrote:Might have to look at going this way, thanks Tom. Is it as simple as the bender looks, or is it a lot more involved?

Did you get the dies from OPW? Any Pics of your bender???? please???

I should have already stipulated that I prefer the draw through benders, Not the bow and arrow style, more common amongst the cheaper ones.
From what I hear they are alot better for accurate smooth bends?


Cheers, Dano.
Toms is a speedwerx/pro tools copy and uses totally different dies than the JD2 model that OPW sells..the speedwerx style bends vertically and the JD2 bends horizontal..dies from speedwerx include die, follower bar, tube holder and pin and vary in price depending on what size you get..from memory the 32nb die was about $620, 1 3/4 inch was $670 and 25nb was $530..



bender is simple to build but make sure you are accurate with measurements when you build it ..

sometimes it is easier just to buy stuff complete..even building your own will probably realistically only save you a couple of hundred

dave
www.bolsys.com.au

the original and the best
Top
Posts: 4426
Joined: Mon Mar 22, 2004 4:39 pm
Location: Sunshine Coast

Post by bru21 »

buy mine. look in for sale.

the benders are only $700 new.

a jack is about $250 alone, steel would be about $200, bolts $20, shaft machining $100 etc. Would be an option of you laser cut and folded 10 units.

I looked at it before buying mine and could not justify it

cheers bru
ADHD Racing would like to thank
Mrs Bru @ Sunshine Coast Developmental Physiotherapy - www.scdphysio.com.au , Ryano @ Fourbys www.generaltire.com.au Blitzkrieg Motorsport
Top
Posts: 433
Joined: Tue Nov 16, 2004 6:24 pm
Location: Medowie NSW

tube bender

Post by HIGH ROLLER »

Also if you want to bend 180 degree then the speedwork one is not the one to get i think it only bends to 110 /120 degree from memory, the ones pete sells (opw) will bend a full 180 degree, i have one of these and they are great really good bends.
TEAM PIRATE navi Tuff Truck 2010 Winners!!!!!
Dreaming of getting back to KOH
Top
Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

Post by dano80 »

Hey Bru. Looked in 4 sale, couldn't see anything resembling a tube bender, maybe I missed it. Anyway PM sent.

Cheers, Dano.
Top
Posts: 202
Joined: Sat Jun 30, 2007 10:36 am
Location: sydney

Contact:
Contact XXL_45L_CRUISER

Post by XXL_45L_CRUISER »

iv been looking at a couple on ebay some of them seem alright.if anyone is selling one pm me please.
cheers
Top
Posts: 432
Joined: Wed Jun 13, 2007 7:46 pm
Location: Tamborine, QLD. QUEENSLANDER!!!!!!

Post by dano80 »

Sorry XXL, first in best dressed. Just kidding, its prolly too far to freight that one of Bru's anyhow.

I will speak to him tomorrow and see if its what I need.

Cheers, Dano.
Top
Posts: 1397
Joined: Sat May 29, 2004 6:58 pm
Location: West Australia Posts: Less than DeWsE

Post by jeep97tj »

Try here im sure they sell benders
support@offroadgear.com.au
Shane
Top
Posts: 792
Joined: Mon Jan 05, 2004 4:43 pm
Location: Campbelltown, Sydney

Contact:
Contact Nev62

Post by Nev62 »

Gasweld -
$149 12t up to 2" or $229 16t up to 3"

https://ishop.gasweld.com.au/ishop/stoc ... rch=Search
FJ62 Crusier GM V8 Diesel Lockers 33 MTs/35 117 extremes
Macarthur District 4WD Club http://www.macarthur4wdclub.com.au
Top
Posts: 5062
Joined: Tue Mar 09, 2004 5:06 pm
Location: queensland

Contact:
Contact ofr57

Post by ofr57 »

http://www.pirate4x4.com/forum/showthread.php?t=376183

i like this idea
[color=green]Vote Earth[/color]
Top
Posts: 5634
Joined: Sun May 08, 2005 10:07 pm
Location: diagonally parked in a parralell universe

Post by fool_injected »

Been looking for that link, thanks
[url=http://www.4x4masters.com.au/]Australian 4X4 Masters Series website[/url]

non illegitimi carborundum!

[url=http://www.suzuki4wd.com.au/forum/]Suzuki 4wd Club of NSW forum[/url]
Top
Post Reply

Return to “General Tech”

Who is online

Users browsing this forum: No registered users and 8 guests