Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

GU 3L TD oil sender unit

Tech Talk for Nissan owners.

Moderators: toaddog, V8Patrol

Forum rules
Post Reply
Posts: 76
Joined: Tue Nov 25, 2003 8:41 am
Location: Katherine NT

GU 3L TD oil sender unit

Post by bambam »

Hey guys, I have an aftermarket (speco) oil press gauge. I don't really need it but had to fill the third hole in the pillar pod I bought for a boost gauge. The problem is, where to fit the huge elec sender unit? I found the factory switch type sender for the idiot light, but it's in a C of a spot. Is there another easily accessible port to tap into on a 3L TD?
Cheers
MORE POWER, ARRG ARRG ARRG!
Top
Posts: 286
Joined: Tue May 11, 2004 8:48 pm
Location: Toowoomba

Post by patrol man »

The oil feed line to the turbo, you can come in over the top of the bango bolt fitting If its a series 3 there will already be a oil sender there, you may be able to use a tee piece there, cheers Phill
Living the dream on the hill that floods
Top
Post Reply

Return to “Nissan”

Who is online

Users browsing this forum: No registered users and 3 guests