bump stops

Post by **cun7s** » Wed Jun 11, 2008 11:36 pm

i need to no what size bump stops to run with a 6inc lift kit and were to get them from

Post by **turps** » Thu Jun 12, 2008 1:00 am

Best bet is to remove spring. And lower car gently till shock bottoms out. And raise lower the std bump stop accordingly.

Post by **drakan69** » Thu Jun 12, 2008 7:54 am

turps wrote:Best bet is to remove spring. And lower car gently till shock bottoms out. And raise lower the std bump stop accordingly.

I use 80 series bumpstops on homemade bumpstop towers, they work well.

dazza30875 · Post by **dazza30875** » Thu Jun 12, 2008 6:07 pm

thanks for that that saves me asking the same question

Post by **cun7s** » Thu Jun 12, 2008 11:16 pm

dazza30875 wrote:thanks for that that saves me asking the same question

thank you

Post by **Suspension Stuff** » Fri Jun 13, 2008 12:20 am

What brand is your shocks? Do you know what length they are?

Shane

Outer Limits 4x4 Board