i was wondering if anyone had a good site or info on leaf spring length/width im chasing a set of longer springs for me 47series ute ive read on ebay of a bloke puttin 60 series into a 40 are they a good option for the extra length im chasin?? ive already got extended shackles and i just need the longer spring to get me a better shackle angle
thanks for any info
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
spring length info
Moderators: toaddog, Elmo, DUDELUX
ok sweet i had a look at that ironman webbi and i think i got a option i might be able to go with,
goin by the number only really checked the length and centre bolt positition
rear 60 series on the front of me 47 (might have to thin the pack out a bit)which give aprox 100mm extra length and bring the front diff forward about 50mm (not sure if this is a good thing or not tbh)
and 79tray back rears on the back of the 47(thining again mayhaps) which are about 170mm longer and move me diff back about 40mm
now i havnt actually looked at the pin size or spring width so after i do that, ill probably be back to square one and because the front gets moved forward it will have to wait till i can do the ps conversion to boot oh and ill need to organise drive shaft spaces to :( ill probably be broke or to old to drive the ute by the time im finished the way this is goin heheheh
goin by the number only really checked the length and centre bolt positition
rear 60 series on the front of me 47 (might have to thin the pack out a bit)which give aprox 100mm extra length and bring the front diff forward about 50mm (not sure if this is a good thing or not tbh)
and 79tray back rears on the back of the 47(thining again mayhaps) which are about 170mm longer and move me diff back about 40mm
now i havnt actually looked at the pin size or spring width so after i do that, ill probably be back to square one and because the front gets moved forward it will have to wait till i can do the ps conversion to boot oh and ill need to organise drive shaft spaces to :( ill probably be broke or to old to drive the ute by the time im finished the way this is goin heheheh
Who is online
Users browsing this forum: No registered users and 4 guests