2 Tyer Questions??

[Remydog05]

1/ What is the widest Offset in 6 stud Rims? EG Patrol, Crusier, etc

2/ What is the biggest tyer you can run on a 15x7? 33 BFG's or 32 Simex somthing like that???

[v6hilux]

1/ What is the widest Offset in 6 stud Rims? EG Patrol, Crusier, etc

Custom rims can be made to any size depending on tyres available. Just look at speedway sprint cars. I think they run about 20 inch wide on a 14 inch rim.

You can get Sunnys from tyre shops with big offset to suit up to 12 inch wide tyres. Any bigger may be a custom request.

2/ What is the biggest tyer you can run on a 15x7? 33 BFG's or 32 Simex somthing like that???

About a 10.5R, but some people have run wider!

[coxy321]

1/ What is the widest Offset in 6 stud Rims? EG Patrol, Crusier, etc

Off the shelf, you'll probably find the "landcruiser" offset (-23mm) to be the widest. But you can get whatever you want if you have enough $$$.

2/ What is the biggest tyer you can run on a 15x7? 33 BFG's or 32 Simex somthing like that???

Whatever you want. It depends how/where you drive your car as to what size tyres will be safe though. On 15x7's i wouldn't go any wider than a 10.5" (but i have run 12.5" with no problems), and no taller than a 33", provided you dont air down too much.

You can buy really good quality 15x8 wheels for $70 each (King Wheels), so you might be better of saving and going for a set of those, and then you can run whatever size you want to!

Coxy

PS. It is spelt "tyres" in Australia, and "tires" in America - pretty sure nobody spells it as "tyers"

[DIRTY ROCK STAR]

bit of an odd question.
my rims on my Fj40 are 13.5inches wide.

the offset is roughly 4inches on the inside and 9inches on the outside.
deep enough offset i cant use a tyre iron to get at wheelnuts need to use sockets and extensions.
but yeah you could have them pretty wide, to run 44bogger etc.

[pongo]

i guess he forgot to say off the shelf or factory, etc

Yeah cruiser off set and x10.5 wide.

Most 15x8 are cruiser offset.

[coxy321]

deep enough offset i cant use a tyre iron to get at wheelnuts need to use sockets and extensions.

A bit off topic, but doesn't Kincrome or Snap-Off make a nice long-reach wheel brace?

I know even with my 33x12.5's i regularly take bark off, or worse - bust my fingernails while using a standard length wheel brace. Pretty sure i had to use a breaker bar and extension when i had the 37's.

Coxy

[Remydog05]

Thanks Crew,

The 6stud question was for wheels to go on a 75 Landcrusier, Doesnt need anything thats not "off the shelf".

The 15x7 question is for Lada rims to go on a Narrow track Sierra so I cant use 15x8's or I will lose the wide offset that the lada rims are.

Thanks again.

[Gwagensteve]

38.5X11 Boggers would be the biggest tyre you can run on a 7" rim

I wouldn't recommend exceeding 10.5 on a 7" rim.

Q78's are really happy on 7's.

Steve.