Well the alternator in my one litre sirra is stuffed now. Now i dont really want it replace it with another 1ltr alternator.
Does anyone have a wiring diagram for a 1.0 ltr sirra?
Is the 1.0 ltr sirra internally or external regulator?
I have a feeling its a pretty simple setup one wire to the battery, an earth and other to work the light on the dash.
Now i was reading this topic http://www.outerlimits4x4.com/phpBB2/vi ... p?t=116388 and it seems like "Gwagensteve" had a 1.0 litre motor in his sirra from what i can see. I take it that plug that was bridged is just hiding under the dash some where?
Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.
1.0 ltr Alternator is stuffed. HELP
Yep, but I never ran the ford alternator on the 1.0, only on my 660.
the jump wires in Christovers picture are correct. It's under the passenger side of the dash attached to a metal box bolted to the firewall.
Yes, the L terminal goes to the light, and B terminal to ig+
Go for it - the Ford alternator is a good mod.
Steve.
the jump wires in Christovers picture are correct. It's under the passenger side of the dash attached to a metal box bolted to the firewall.
Yes, the L terminal goes to the light, and B terminal to ig+
Go for it - the Ford alternator is a good mod.
Steve.
[quote="greg"] some say he is a man without happy dreams, or that he sees silver linings on clouds and wonders why they are not platinum... all we know, is he's called the stevie.[/quote]
OK i have got the 1.3 alternator all bolted in and wired up. It is charging the battery at 14volts. And when ya hit the head lights etc it drops for a bit and builds back up.
My only concern is that looking at what wires were crossed in this pic from another topic.
Mine is nothing like that. So i didnt bother crossing any just left it pluged in.
So my question is:
Should the alternator drop back to 12volts once the battery is fully charged?
My only concern is that looking at what wires were crossed in this pic from another topic.
Mine is nothing like that. So i didnt bother crossing any just left it pluged in.
So my question is:
Should the alternator drop back to 12volts once the battery is fully charged?
My 1.0 had 3 wires at the alternator as it had an external regulator. I dont know why your 1.0 only has 2.
Do you have the external regulator located up under the passenger side??
Did the 1.3L alternator just plug straight in? Was is a round or a square plug?
i though the 1.3's had a round plug and the 1.0's a 3 pin squre style plug?
Also voltage shoud not brop when the battery is charged, it should remain around the 13.8-14.4 volt mark.
Simon
Do you have the external regulator located up under the passenger side??
Did the 1.3L alternator just plug straight in? Was is a round or a square plug?
i though the 1.3's had a round plug and the 1.0's a 3 pin squre style plug?
Also voltage shoud not brop when the battery is charged, it should remain around the 13.8-14.4 volt mark.
Simon
Hookers are like bowling balls, You pick them up, put your fingers in them, then throw them in the gutter and they come back for more.
it had two wires coming out of the back of the alternator Plus a big one that bolted onto the side of the alternator that went to the battery.
I looked pretty hard for the external regulator that should be in the passenger side footwell but couldnt find it.
Ok so it is fine for the battery to be always getting 14 volts. Just didnt wanna go for a drive and find a melted battery under the bonnet.
I looked pretty hard for the external regulator that should be in the passenger side footwell but couldnt find it.
Ok so it is fine for the battery to be always getting 14 volts. Just didnt wanna go for a drive and find a melted battery under the bonnet.
Who is online
Users browsing this forum: No registered users and 1 guest