Outer Limits 4x4 Board

Posted: **Tue Jun 17, 2008 5:32 pm**

excuse my ignorance, but do i need to run the vacum line to the brake booster?

i have an 80 series brake booster and master cylinder, and a 1UZ engine.
where does the vacum line go onto the engine?

anyone help?

Posted: **Tue Jun 17, 2008 7:55 pm**

I'd say i'll come off the intake manifold somewhere boof or someone may be able to help out with a pic

Posted: **Sun Jun 22, 2008 10:57 am**

yeh i might pm a few of the guys with 1uz's

Posted: **Sun Jun 22, 2008 1:26 pm**

rear of manifold top section right in the centre

ill take a pick of the soarer motor hangin in the garage in a sec for you

Posted: **Sun Jun 22, 2008 1:45 pm**

Posted: **Sun Jun 22, 2008 6:36 pm**

thanks mate.

is it the small vac line, or the larger one held in with the bolt, as mine just has the bolt.

Posted: **Sun Jun 22, 2008 8:06 pm**

The larger one. It will be the same size as the one on your booster or very close to it.

Posted: **Sun Jun 22, 2008 8:15 pm**

ione of the 1uz i have didnt have a spot in the back for one,
i wasnt using the idle valve so i made a plate up wth a brab fitting for the vac line

Posted: **Mon Jun 23, 2008 9:55 am**

Thommo 73 wrote:ione of the 1uz i have didnt have a spot in the back for one,
i wasnt using the idle valve so i made a plate up wth a brab fitting for the vac line

I had to get one of the fittings, the soarer engine has an electric booster, so just a bolt, no fitting

WHOOPS, you can 'T' out of a another line or get the fitting

Posted: **Mon Jun 23, 2008 4:29 pm**

bj on roids wrote:
Thommo 73 wrote:ione of the 1uz i have didnt have a spot in the back for one,
i wasnt using the idle valve so i made a plate up wth a brab fitting for the vac line
I had to get one of the fittings, the soarer engine has an electric booster, so just a bolt, no fitting

WHOOPS, you can 'T' out of a another line or get the fitting

thats a soarer engine in the pics bj what drugs are you on ?

Posted: **Mon Jun 23, 2008 8:11 pm**

Ice wrote:bj what drugs are you on ?

Could be drinking the bong water

maybe some of the soarer's had a hydrulic/electric booster haven't don'e much with them but i know that some of the 100 series are hydrulic boosted not vac

Posted: **Tue Jun 24, 2008 9:06 pm**

my motor was soarer that had the elec booster.
that one a rear sump??

Posted: **Thu Mar 25, 2010 9:29 pm**

Ice wrote:
bj on roids wrote:
Thommo 73 wrote:ione of the 1uz i have didnt have a spot in the back for one,
i wasnt using the idle valve so i made a plate up wth a brab fitting for the vac line
I had to get one of the fittings, the soarer engine has an electric booster, so just a bolt, no fitting

WHOOPS, you can 'T' out of a another line or get the fitting
thats a soarer engine in the pics bj what drugs are you on ?

No mate, thats not a soarer motor in the pic, Celsior, Crown, maybe Aristo. NOT Soarer. Soarer had electronic booster, no need for engine vac.

Outer Limits 4x4 Board

brake booster vacum line - 1UZ?

brake booster vacum line - 1UZ?