Notice: We request that you don't just set up a new account at this time if you are a previous user.
If you used to be one of our moderators, please feel free to reach out to Chris via the facebook Outerlimits4x4 group and he will get you set back up with access should he need you.
Recovery:If you cannot access your old email address and don't remember your password, please click here to log a change of email address so you can do a password reset.

Air leak from diff breater

Tech Talk for Suzuki owners.

Moderators: lay80n, sierrajim

Post Reply
Posts: 189
Joined: Sun May 18, 2008 11:41 am
Location: Anywhere

Air leak from diff breater

Post by lockdup »

hi guys, im a newish member to this site, ive done a search and couldnt find results. i recently had fitted an air locker in the rear of my vitara. i took it for a spin for the first time tonight and when i switched the locker on all the air escapes from the breather. this is not normal. i causes the compresser to start every 10 secs or so.

what should i do? am i doing something wrong?

cheers
sin
Posts: 1325
Joined: Wed Jul 04, 2007 4:13 pm
Location: brisbane australia..logan reserve

Post by 11_evl »

sounds like a seal has let go inside the locker and air is bypassing internally in the diff, my mates front vit diff did that not so long age, they said it had water in it and it cost $500 to fix:(
michael
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

The 'o'ring is not sealing properly, which is a bugger. Have to pull the whole centre out to fix a 50c part.
;)
Posts: 189
Joined: Sun May 18, 2008 11:41 am
Location: Anywhere

Post by lockdup »

ok but i havnt even used the car since arb installed it. so theres no way water could be in it. is it covered by warranty?
if it is the 0' ring shouldnt ARB have tested it before handing it over?

cheers mate
Posts: 1889
Joined: Mon Sep 20, 2004 10:23 pm
Location: Brisbane

Post by just cruizin' »

Should have but shiat happens, if it's only just been done take it back especially if you forked out mega bucks to get ARB to install
;)
Posts: 189
Joined: Sun May 18, 2008 11:41 am
Location: Anywhere

Post by lockdup »

yea im not happy about it. when you pay that much money you expect them to do a check. its only been 2 days since ive had it installed by ARB. i think i might have to kick up a bit of a fuss tomorrow.
Posts: 2169
Joined: Fri Jun 16, 2006 4:41 pm
Location: melbourne

Post by joeblow »

ok....doubt it will be the o rings. which store fitted it?.will more than likely be the adjuster nut locking tab, these have to be bent slightly or they will push down on the seal housing and leak under load, yes, under load...not a bench test.
lwb 1.6efi,4sp auto,f&r airlockers,dual t/cases.custom coils.builder of ROAD LEGAL custom suzukis...and other stuff.
CAD modelling-TECH drawings-DXF preparation.
http://www.auszookers.com/index.php
Posts: 189
Joined: Sun May 18, 2008 11:41 am
Location: Anywhere

Post by lockdup »

i went to arb this morn and showed em the problem. they said they had done the bench test but like you said under load. they are taking in back to fix the problem. they were very good n ide have to say pritty happy with their service aslong as all is good next time, lol

cheers guys
Post Reply

Who is online

Users browsing this forum: No registered users and 2 guests